Installation instructions - Free
Float Railed Handguard for
Daewoo K2 and DR-200 rifles
  1. Remove from packaging.
  2. Remove 4 button head screws and
    separate upper unit from lower.
  3. Slide lower over barrel and align rear
    of unit in receiver.
  4. Attach upper unit to lower using the
    original 4 screws.
  5. Seat assembled handguard into front
    of receiver by tapping with RUBBER
    mallet.
  6. Install (2) 3/8" socket head cap
    screws from separate packet through
    top rail into factory scope mount
    holes.
  7. Install (1) 1/2" socket head cap screw
    in lower hole.
  8. Finished